Persoana mea de contact
Hennlich S.R.L

Str Patria, Nr. 17

310106 Arad

+40 257 211021
+40 257 211021

Produse

Filtru

Cerințe de bază
Size
Requirements
Material

Număr de produse: 57

iglidur® G, sleeve bearing with flange, mm
  • The all-round classic with an excellent price/performance ratio
  • High wear resistance
  • Resistance to dust and dirt
  • Cost-effective
Începând cu 0,74 USD/Pc.
La pagina produsului
iglidur® J, sleeve bearing with flange, mm
  • The versatile endurance runner, highly resistant to wear on (nearly) all shafts with very low coefficients of friction
  • Low wear against different shaft materials
  • Low coefficients of friction in dry operation
  • Vibration-dampening
Începând cu 1,12 USD/Pc.
La pagina produsului
iglidur® A350, sleeve bearing with flange, mm
  • Completely lubrication-free belt guiding
  • Low drive power
  • The endurance runner at higher temperatures in the food sector
  • Tight deflection radii
  • Compliant with EU regulation 10/2011
  • Long service life of the belt
  • FDA-compliant
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • For use with temperatures up to +180 °C
Începând cu 2,84 USD/Pc.
 
Timp de livrare la cerere
La pagina produsului
iglidur® M250, sleeve bearing with flange, mm
  • The tough all-rounder with excellent vibration dampening
  • Excellent vibration dampening
  • Resistant to edge loads
  • High impact resistance
Începând cu 0,87 USD/Pc.
La pagina produsului
iglidur® X, sleeve bearing with flange, mm
  • The chemical and temperature specialist, up to 150 MPa static
  • Temperature resistant from -100 °C to +250 °C in continuous operation
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Universal chemical resistance
  • High compressive strength
Începând cu 1,70 USD/Pc.
La pagina produsului
iglidur® W300, sleeve bearing with flange, mm
  • The classic endurance runner, very wear resistant on (virtually) all shafts
  • For especially long service life
  • Low coefficient of friction
  • Extremely high wear resistance
Începând cu 1,40 USD/Pc.
La pagina produsului
iglidur® K, sleeve bearing with flange, mm
  • Versatile and cost-effective for medium temperatures
  • Low humidity absorption
  • Wear resistant
  • Cost-effective
  • Lubrication and maintenance-free
  • Standard range from stock
Începând cu 0,91 USD/Pc.
La pagina produsului
iglidur® SG03, flanged sleeve bearing, mm
  • The natural felt seals perfectly against dust and dirt
  • In laboratory tests, a service life up to 50 times higher was achieved.
  • Ready-to-install solution
La cerere
 
Timp de livrare la cerere
La pagina produsului
iglidur® GLW, sleeve bearing with flange, mm
  • Cost-effective material for mass production
  • Applications with static loads
  • Cost-effective
  • Dirt-resistant
  • Resistant to vibrations
  • Lubrication and maintenance-free
La cerere
 
Timp de livrare la cerere
La pagina produsului
iglidur® J3, sleeve bearing with flange, mm
  • The new endurance runner: specialist for pulsating loads
  • Low coefficients of friction
  • Good liquid media resistance
  • Low humidity absorption
Începând cu 1,39 USD/Pc.
 
Timp de livrare la cerere
La pagina produsului
iglidur® W360, sleeve bearing with flange, mm
  • General purpose endurance runner
  • Extremely wear-resistant
  • Continuous use up to +180°C
  • Suitable for wet environments
Începând cu 2,84 USD/Pc.
 
Timp de livrare la cerere
La pagina produsului
iglidur® J260, sleeve bearing with flange, mm
  • Ideal for plastic shafts
  • Very good c. o. f. for low or medium loads
  • Good liquid media resistance
  • Slightly higher temperature rating than iglidur® J
Începând cu 1,72 USD/Pc.
 
Timp de livrare la cerere
La pagina produsului
iglidur® J350, sleeve bearing with flange, mm
  • Endurance runner with high dimensional stability at high temperatures - Can be used with many kind of shafts and loads
  • Excellent coefficient of friction against steel
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Continuous service temperature up to +180 °C
  • For medium to high loads
Începând cu 1,92 USD/Pc.
 
Timp de livrare la cerere
La pagina produsului
iglidur® R, sleeve bearing with flange, mm
  • Low-cost material, low wear
  • Good abrasion resistance
  • Low coefficients of friction in dry operation
  • Cost-effective
Începând cu 0,96 USD/Pc.
La pagina produsului
iglidur® L250, sleeve bearing with flange, mm
  • For high speeds
  • Specially made for fast rotating applications
  • Very low coefficients of friction
  • Excellent wear resistance
Începând cu 4,31 USD/Pc.
La pagina produsului

Consultanţă

We would be happy to answer your questions personally

Expediere și consultanță

În persoană:

Luni - Vineri de la 7 am la 8 pm.
Sâmbătă de la 8 am la 12 pm.

Online:

24h