Clip bearing, maximum compensation of tolerances, EGFM-T R, igubal®

Dimensional series: E following DIN ISO 12240
Housing material: igumid G
Material of spherical ball: iglidur® R
Maintenance-free dry operation
Easy installation
Max. tolerance compensation ±0.2 mm

Nu sunte?i siguri unde se potrive?te?

Product description

igubal® spherical bearings

The use of spherical bearings is usually associated with heavy bearing materials, difficult installation and high costs. Most of the time, maintenance is still necessary in the long term, and the bearings are only corrosion-resistant in special designs. Often roller bearings or plain bearings malfunction prematurely due to high edge loads, or because they need to be elaborately readjusted, reamed or refitted in order to compensate for alignment errors. igubal® spherical bearings put an end to all of these disadvantages and open up many new possibilities for your engineering design: they are easy to handle, cost-effective, lightweight and robust.

The housing is made from igumid G, an extremely impact-resistant, long-fibre-reinforced polymer. Suitable for temperatures from -30°C to +80°C in long-term use.

Here, the spherical ball is manufactured from iglidur® R, which is a low-cost material with a low coefficient of friction and good wear resistance at low to medium loads.

Maintenance-free dry operation
Easy assembly

Typical application areas

Food industry
Railway technology
Automotive industry
Plant construction

You can find many further application areas here Industry solutions

When to use it?

For high axial and radial loads
When easy installation is required
In case of reduced installation space
If chemical resistance is required
If a cost-effective option is required
If you need dirt-resistant bearings
To adjust misalignments

When not to use it?

If temperatures are higher than +80°C
If diameters above 30mm are required
When rotation speeds higher than 0.5m/s are required

Use our filter options to find the suitable product

Tolerances
maintenance-free igubal® spherical bearings have a tolerance in the inner diameter of E10. The shaft tolerance should be included between h6 and h9. The bearing clearance allows for expansion of the bearings due to increasing temperatures. Check the inner diameter

Assembly
Due to the tolerance compensation, no exactly toleranced housing is required. Please refer to the technical data for the respective maximum and minimum dimensions of the housing hole. In order to achieve the axial loads specified there, the bearing should be additionally secured axially.

Date tehnice

Unelte online

Motor de căutare lagăre cu articulaţie

Rapid la lagărele cu articulație potrivite. Motorul de căutare produse iglidur® vă afișează soluțuia cu lagărele cu articulație potrivite pentru aplicația dvs. cu doar câteva clicuri.

Expert pentru lagăre cu articulaţie

Introduceți numai câteva informații pentru a calcula durata de viață preconizată a lagărelor cu articulație igubal®.

Descarcari

Alte solutii

Clip bearing, heavy duty, ECLM-HD, igubal®

For high axial and radial loads, dimensional series E

Începând cu 6,48 EUR/Pc.

Spherical bearing, KGLI, inch, igubal®

Classic design, easy assembly, dimensional series K

Începând cu 2,88 EUR/Pc.

Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V

Simple assembly, two mounting holes, dimensional series E

Începând cu 6,65 EUR/Pc.

Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® R

Simple assembly, two mounting holes, dimensional series E

Începând cu 4,75 EUR/Pc.

Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® R

For higher radial loads, four mounting holes, dimensional series E

Începând cu 5,50 EUR/Pc.

Double joint, EGZM, R, igubal®

Robust plastic, dimensional series E

Începând cu 3,77 EUR/Pc.

Pillow block bearing, ESTM, R, igubal®

Simple assembly, two mounting holes, dimensional series E

Începând cu 3,66 EUR/Pc.

Spherical insert bearing, JEM, narrow, mm, igubal®

For metal bearing housings, low moisture absorption, dimensional series E

Începând cu 23,25 EUR/Pc.

Spherical ball, cost-effective, RKM, mm, igubal®

Low-cost, dimensional series K

Începând cu 2,55 EUR/Pc.

Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®

Splittable, low moisture absorption, dimensional series K

Începând cu 15,85 EUR/Pc.

Spherical ball for underwater applications, UWEM, mm, igubal®

For underwater applications, dimensional series E - slim version

Începând cu 1,82 EUR/Pc.

Spherical ball, clearance-free, J4VEM, mm, igubal®

Clearance-free, low-cost, low moisture absorption, dimensional series E

Începând cu 2,07 EUR/Pc.

Spherical insert bearing, A350EM, narrow, mm, igubal®

For metal bearing housings, FDA-compliant, dimensional series E

Începând cu 28,92 EUR/Pc.

Spherical ball, WEI, inch, igubal®

Standard material, dimensional series E - narrow version

Începând cu 2,53 EUR/Pc.

Angled ball and socket joint, WGLM LC, low cost, igubal®

Low-cost, left-hand thread, with plastic ball stud

Începând cu 1,85 EUR/Pc.

Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®

Low-cost, right-hand thread, with metal ball stud

Începând cu 4,62 EUR/Pc.

Angled ball and socket joint, WGRM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of polymer

Începând cu 5,49 EUR/Pc.

In-line ball and socket joint, AGLM, igubal®

Left-hand thread, with spherical cap, with plastic ball stud

Începând cu 2,93 EUR/Pc.

In-line ball and socket joint, AGLM LC, low-cost igubal®

Low-cost, left-hand thread, with plastic ball stud

Începând cu 2,02 EUR/Pc.

Adapter screw, PKRM, igubal®

Right-hand thread

Începând cu 7,33 EUR/Pc.

Clevis joint with pin and circlip, GELMK, igubal®

Left-hand thread

Începând cu 3,11 EUR/Pc.

Clevis joint with spring-loaded fixing clip, GELMF, igubal®

Left-hand thread

Începând cu 3,22 EUR/Pc.

Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®

Left-hand thread

Începând cu 8,18 EUR/Pc.

igubal® pillow block bearing, KSTM

Compensation of misalignments, two mounting holes, dimensional series K

Începând cu 5,03 EUR/Pc.

Pillow block bearing, ESTM, W300, igubal®

Simple assembly, two mounting holes, dimensional series E

Începând cu 4,17 EUR/Pc.

Pillow block bearing, ESTM-GT-GT, igubal®

Quick assembly, split, two mounting holes, dimensional series E

Începând cu 7,89 EUR/Pc.

igubal® AD-01-ESTM adapter for pillow block bearings

Accessory, for pillow block bearings of the dimensional series E

La cerere

Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J

High stiffness, split housing, four mounting holes, dimensional series E

Începând cu 30,71 EUR/Pc.

High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, easy assembly, two mounting holes, dimensional series E

Începând cu 11,16 EUR/Pc.

High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, for high radial loads, four mounting holes, dimensional series E

Începând cu 12,24 EUR/Pc.

Spherical bearing, EGLM, igubal®

Space saving, dimensional series E

Începând cu 5,17 EUR/Pc.

Spherical thrust bearing, SAM, igubal®

Compensation of misalignment errors

Începând cu 3,55 EUR/Pc.

Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V

For higher radial loads, four mounting holes, dimensional series E

Începând cu 7,03 EUR/Pc.

Spherical bearing, low cost, KGLM LC, J4, igubal®

Cost-effective, simple assembly, dimensional series K

Începând cu 3,52 EUR/Pc.

Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®

Tolerance compensation, dimensional series E

Începând cu 6,25 EUR/Pc.

Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®

Tolerance compensation, dimensional series E

Începând cu 12,04 EUR/Pc.

Double joint, EGZM, J4VEM, igubal®

Robust plastic, dimensional series E

La cerere

Angled ball and socket joint, WGLM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of galvanised steel

Începând cu 5,49 EUR/Pc.

Variable coupling joint, WDGM, with ball studs, igubal®

Individual alignment of the bearing position

Începând cu 11,61 EUR/m

Variable double joint, KDGM, R, igubal®

Individual alignment of the bearing position

Începând cu 17,49 EUR/Pc.

Variable double joint, KDGM, EK, igubal®

Individual alignment of the bearing position

Începând cu 30,20 EUR/Pc.

Clevis joint, GERI, igubal®

Right-hand thread

Începând cu 2,75 EUR/Pc.

Spherical bearing, slim line, KGLI SL, igubal®

For extremely small installation space, dimensional series K

Începând cu 3,02 EUR/Pc.

Clevis joint with pin and circlip, GERIK, igubal®

Right-hand thread

Începând cu 3,11 EUR/Pc.

Split pillow block bearing for square profiles, ESQM, igubal®

Easy assembly and disassembly

Începând cu 95,66 EUR/Pc.

Clip bearing with galvanised steel ball studs, igubal®

Connection for rotating and pivoting movements

Începând cu 3,90 EUR/Pc.

Ball stud made of tribo-plastic with male thread, GZRM, igubal®

Ball stud made of Tribo plastic

Începând cu 0,66 EUR/Pc.

Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®

Low moisture absorption, dimensional series E

Începând cu 5,08 EUR/Pc.

Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®

High holding forces when assembled

Începând cu 42,38 EUR/m

Țara/Regiune

Selectând țara dvs., vi se vor afișa oferte și informații locale.

Vă rugăm să alegeți locația de livrare