Vă rugăm să alegeți locația de livrare

Selectarea paginii țării/regiunii poate influența diferiți factori, cum ar fi prețul, opțiunile de expediere și disponibilitatea produselor.
Persoana mea de contact
Hennlich S.R.L

Str. Timotei Cipariu, Nr.5-7

310213 Arad

+40 257 211021
+40 257 211021
RO(RO)

Electric motors

igus® offers an extensive product range of electric motors. This portfolio is led by maintenance-free and durable hybrid stepper motors. Here in the online shop, they are available in various sizes and can be expanded to include encoders, brakes and gearboxes. Stepper motors are particularly suitable for applications with high torque at low speeds. The product range is extended by cost-effective and quiet DC motors. DC motors can be operated without complex external power electronics, namely via a battery, motor control system or a power supply unit. It is also characterised by a particularly space-saving design. As a result, the DC motors are no longer dependent on the motor flange and coupling. And last but not least, EC motors, also known as brushless DC motors, complete the range of electric motors. The BLDC motors cover a wide speed range and have very good efficiency. They are therefore well suited for applications with fast and powerful movements. Since the motor cannot be commissioned alone, igus® also offers motor control systems and other necessary components such as gearboxes and proximity switches.

Numar de produse: 92

drylin® D7- (X) stepper motor output stage

  • Suitable for 28 - 42mm motor flange size (NEMA11-17)
  • Up to 3A peak current
  • 5-24V control & 24-48V load voltage
  • Operation mode 1: clock/direction
  • Operation mode 2: D7 & D7-1: jog mode; D7-2& D7-3: loop mode
  • Quiet operation & automatic tuning
Începând cu 92,21 EUR/Pc.
4 articole, acestea fiind gata de expediere din Germania:
4 in 24-48 ore din Germania
La pagina produsului
Nou

drylin® E stepper motor, connection cable, NEMA 17

  • Installation size: NEMA17/flange dimension 42mm
  • Protection class: IP65
  • Holding torque: 0.50Nm
  • Rated current: 1.80A
  • Motor connection: connection cable 1m
Începând cu 49,87 EUR/Pc.
1 articole, acestea fiind gata de expediere din Germania:
1 in 24-48 ore din Germania
La pagina produsului
Nou

drylin® E stepper motor, connection cable, NEMA 23

  • Installation size: NEMA23/Flange dimension 56mm 
  • Protection class: IP65 
  • Holding torque: 2.00Nm
  • Nominal current: 4.20A
  • Motor connection: connection cable 1m 
Începând cu 82,08 EUR/Pc.
1 articole, acestea fiind gata de expediere din Germania:
1 in 24-48 ore din Germania
La pagina produsului
Nou

drylin® E stepper motor, connection cable, NEMA 24

  • Installation size: NEMA24/flange dimension 60mm 
  • Protection class: IP65 
  • Holding torque: 3.50Nm 
  • Nominal current: 4.20A
  • Motor connection: connection cable 1m 
Începând cu 97,75 EUR/Pc.
1 articole, acestea fiind gata de expediere din Germania:
1 in 24-48 ore din Germania
La pagina produsului
Nou

drylin® E stepper motor, connection cable, NEMA34

  • Installation size: NEMA 34/flange dimension 86mm
  • Protection class: IP65
  • Holding torque: 5.90Nm
  • Nominal current: 6.40A
  • Motor connection: connection cable 1m 
Începând cu 185,72 EUR/Pc.
1 articole, acestea fiind gata de expediere din Germania:
1 in 24-48 ore din Germania
La pagina produsului

drylin® D8- (X) stepper motor output stage

Product information
  • Without connection cables
  • Set consists of 3x drylin D8
 
  • Can control stepper motors with up to 4A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
Începând cu 113,13 EUR/Pc.
4 articole, acestea fiind gata de expediere din Germania:
4 in 24-48 ore din Germania
La pagina produsului

drylin® D9- (X) stepper motor output stage

  • Suitable for 86mm motor flange size (NEMA34)
  • Up to 9.8A peak current
  • 5-24V control & 24-48V load voltage
  • Operation mode 1: clock/direction
  • Operation mode 2: D7 & D7-1: jog mode; D7-2& D7-3: loop mode
  • Quiet operation & automatic tuning
Începând cu 123,99 EUR/Pc.
4 articole, acestea fiind gata de expediere din Germania:
4 in 24-48 ore din Germania
La pagina produsului

drylin® D1 motor control system for stepper, DC and EC/BLDC motors

  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation here before you buy 
Începând cu 492,49 EUR/Pc.
La pagina produsului

drylin® D2 motor control system for stepper, DC and EC/BLDC motors

  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff
     
The drylin® D1 motor control system and the D2 are identical except for the housing.
Începând cu 472,70 EUR/Pc.
La pagina produsului

drylin® D3 for direct current motors

  • Simple automation directly using the control system without software and/or PC
  • Operation with limit switch or via power consumption
  • Left/right operation and speed control directly on the housing
  • Option for external switches/joysticks
  • Various modes of operation, such as tip operation and start to finish (semi-automatic)
  • Various adjustable acceleration ramps
  • Power supply via 24V/2.5A
     
    All relevant documents for dryve D3 can be found in the downloads.
Începând cu 174,72 EUR/Pc.
1 articole, acestea fiind gata de expediere din Germania:
1 in 24-48 ore din Germania
La pagina produsului

drylin® D3-LM motor control system for DC motors with loop mode

  • Same dimensions as the standard D3
  • Extended functions for "Micro Automation"
  • Individually preprogrammed pendulum movements
  • Individually preprogrammed pause times between movements

drylin® E DC motor with planetary gearbox and protective housing

  • Installation size: flange dimension 36/42mm  
  • Protection class: IP41 
  • Torque: 0.1Nm to 1.5N 
  • Operating voltage: 12VDC & 24VDC 
  • Speed: up to 440rpm  
  • Direct battery operation possible 
  • Motor connection: Metric M12 connector 
Începând cu 164,96 EUR/Pc.
3 articole, acestea fiind gata de expediere din Germania:
3 in 24-48 ore din Germania
La pagina produsului

drylin® E stepper motor with connector, NEMA 17

  • Installation size: NEMA17/flange dimension 42mm
  • Protection class: Motor housing IP65 (shaft seal IP52)
  • Holding torque: 0.50Nm
  • Rated current: 1.80A
  • Motor connection: Metric M12 connector
Începând cu 141,23 EUR/Pc.
1 articole, acestea fiind gata de expediere din Germania:
1 in 24-48 ore din Germania
La pagina produsului

drylin® E stepper motor with stranded wire, NEMA 17

  • Installation size: NEMA17/flange dimension 42mm
  • Protection class: IP40
  • Holding torque: 0.5Nm
  • Rated current: 1.80A
  • Motor connection: stranded wires with JST connector
Începând cu 54,38 EUR/Pc.
1 articole, acestea fiind gata de expediere din Germania:
1 in 24-48 ore din Germania
La pagina produsului

drylin® E stepper motor with connector and encoder, NEMA 17

  • Installation size: NEMA17/flange dimension 42mm
  • Protection class: Motor housing IP65 (shaft seal IP52)
  • Holding torque: 0.50Nm
  • Rated current: 1.80A
  • Motor connections: Metric M12 connectors
Începând cu 269,36 EUR/Pc.
1 articole, acestea fiind gata de expediere din Germania:
1 in 24-48 ore din Germania
La pagina produsului
The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.