Blocuri de lagăr fără coroziune pentru șuruburi de acționareBlocuri de lagăr prin sinterizare cu laser dryspin® Pentru dimensiunile filetului de 6–24 mm sunt disponibile blocuri practice de sprijin pentru șuruburi de acționare. Opțiuni de montare cu bucșe sau rulmenți cu bile (BB) cu dinamică ridicată. Toate blocurile de sprijin pentru șurub de acționare, precum și inelul de fixare corespunzător, sunt furnizate din aluminiu eloxat.
► Fără lubrifiere și fără întreținere
► Carcasă pentru suportul șurubului de acționare
► Orificii de montare pentru designul dvs.
► Pregătite pentru conectarea accesoriilor precum indicatoare de poziție și blocaje manuale
► Lagăre de sinterizare cu laser disponibile pentru șuruburi de acționare cu diametrul de la 6 mm
► Versiuni pentru filet TR și DS
FL: lagăr fix cu inel de fixare anodizat cu filete pe dreapta și bucșă fără lubrifiere iglidur®
LL: lagăr flotant cu bucșă fără lubrifiere iglidur®
LH: opțional cu filet stânga, doar TR10, TR2, TR10 și TR3
_________________________________________________________________________________________
Why are there different versions? The bearing arrangement has to fulfil the principle of clarity. Furthermore, the bearing must ensure the defined control of the force flow. If it does, the bearing is considered statically determined. There are various bearing options, such as the
fixed floating bearing and the
double-sided floating bearing. Fixed floating bearing:the fixed bearing clearly positions the shaft in an axial direction. The fixed bearing must therefore absorb both radial and axial forces and guide them into the surrounding structure. This can basically be fulfilled by a single bearing. The floating bearing corrects parallelism errors minimally and offers thermal expansion capability, which means that the cable is not stressed.
Advantages of fixed floating bearing
► No axial clearance
► Non-critical shaft expansion (due to such factors as temperature)
► Suitable for changing axial loads
► Clarity of forces applied
Double-sided floating bearing:in a double-sided floating bearing, the lead screw is not clearly fixed in the axial direction. This means that without stressing the bearing, mechanical or thermal differences in length can be absorbed, but the lead screw is not protected against drifting. This has to be considered in particular when dealing with positioning applications.
Advantages of double-sided floating bearings:
► Cost-effective
► Low design cost
► Non-critical shaft expansion (due to such factors such factors as temperature) in the area of clearance
Disadvantages:
► Not clearly fixed in the axial direction
► Not suited to changing axial loads
► Only if axial clearance does not impair function
_________________________________________________________________________________________
Versions
Fixed bearing version (FL)Depending on thread dimensions, this version has the clamping ring clamped into the lead screw itself or to the lead screw's outer diameter. For high helix lead screws, it is always the outer diameter that it is clamped to.
► Note:
you can also choose a bearing block for your application that uses the measurement d1 for clamping onto the turned machined end.
Floating bearing (FL):depending on the lead screw's dimensions, a machined end must be turned to the value d1. You can see below which dimensions this applies to. The floating bearing block merely supports the lead screw. This type does not prevent the lead screw from drifting.
Ball bearing type (BB):this bearing block should always be used in case of highly dynamic applications, e.g. when a motor is involved
_________________________________________________________________________________________
Sfat de proiectare pentru prelucrarea capătului șurubului de acționare: | Număr piesă | d1 mm | | | | | | | | | | | | | | |
| SLS-16-LL | 12 |
| SLS-16-LL | 12 |
| SLS-18-LL | 12 |
| SLS-18-LL | 12 |
| SLS-18-LL | 12 |
| SLS-18-LL | 12 |
| SLS-20-LL | 12 |
| SLS-24-LL | 14 |
| SLS-S16-LL | 12 |
| SLS-S18-LL | 12 |
| SLS-S20-LL | 12 |
► Notă privind capacitatea maximă de încărcare: aceasta poate depăși sarcina maximă a piuliței pentru șurub de acționare.
