Vă rugăm să alegeți locația de livrare

Selectarea paginii țării/regiunii poate influența diferiți factori, cum ar fi prețul, opțiunile de expediere și disponibilitatea produselor.
Vizualizați toate locațiile
Accesați www.igus.com
myigus
Cos de cumparaturi
(0)
Persoana mea de contact
Hennlich S.R.L

Str. Timotei Cipariu, Nr.5-7

310213 Arad

+40 257 211021
+40 257 211021
Trimite?i mesaj
Vede?i toate contactele
RO(RO)
Meniu
  1. Pagina initiala
  2. Lagăre articulate
  3. Articulații unghiulare / în linie
  4. Angled ball and socket joint, WGRM, with steel pins, igubal®

Angled ball and socket joint, WGRM, with steel pins, igubal®

  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • Material of ball cap: iglidur® W300
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Vibration dampening
  • Insensitive to dirt and dust

Nu sunte?i siguri unde se potrive?te?

Expert system
Free sample request
Product description
igubal® angled ball and socket joint
 
igubal® angled ball and socket joints are insensitive to dirt and dust.
 
The housing is made from igumid G, an extremely impact-resistant, long-fibre-reinforced polymer. Suitable for temperatures from -30 °C to +80 °C in long-term use.
 
In standard angled ball and socket joints, the spherical cap is made from iglidur® W300 material, known for its low coefficients of friction in dry operation and extremely low tendency to stick-slip. This is especially important for low loads and very slow movements.
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Vibration dampening
  • Insensitive to dirt and dust
     
    You will find plenty of additional application areas at our Industry solutions
Date tehnice
Descarcari

Alte solutii

In-line ball and socket joint, AGRM, with steel pin, igubal®
In-line ball and socket joint, AGRM, with steel pin, igubal®

Right-hand thread, with spherical cap, with metal ball stud

Începând cu 4,49 EUR/Pc.
Spherical ball, standard, WKM, mm, igubal®
Spherical ball, standard, WKM, mm, igubal®

Standard material, dimensional series K

Începând cu 2,49 EUR/Pc.
Spherical insert bearing, JEM, narrow, mm, igubal®
Spherical insert bearing, JEM, narrow, mm, igubal®

For metal bearing housings, low moisture absorption, dimensional series E

Începând cu 23,25 EUR/Pc.
Rod end with female thread, detectable, KBRM CL, spherical ball iglidur® RN248, mm
Rod end with female thread, detectable, KBRM CL, spherical ball iglidur® RN248, mm

Detectable, right-hand thread, dimensional series K, housing B

La cerere
Rod end with female thread, detectable, KBLM CL, spherical ball iglidur® RN248, mm
Rod end with female thread, detectable, KBLM CL, spherical ball iglidur® RN248, mm

Detectable, left-hand thread, dimensional series K, housing B

La cerere
Rod end with female thread, detectable, EBRM, spherical ball iglidur® RN248, mm
Rod end with female thread, detectable, EBRM, spherical ball iglidur® RN248, mm

Detectable, right-hand thread, dimensional series E, housing B

La cerere
Spherical ball, cost-effective, RKM, mm, igubal®
Spherical ball, cost-effective, RKM, mm, igubal®

Low-cost, dimensional series K

Începând cu 2,55 EUR/Pc.
Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®
Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®

Splittable, low moisture absorption, dimensional series K

Începând cu 15,85 EUR/Pc.
Spherical ball for underwater applications, UWEM, mm, igubal®
Spherical ball for underwater applications, UWEM, mm, igubal®

For underwater applications, dimensional series E - slim version

Începând cu 1,82 EUR/Pc.
Spherical ball, clearance-free, J4VEM, mm, igubal®
Spherical ball, clearance-free, J4VEM, mm, igubal®

Clearance-free, low-cost, low moisture absorption, dimensional series E

Începând cu 2,07 EUR/Pc.
Spherical insert bearing, A350EM, narrow, mm, igubal®
Spherical insert bearing, A350EM, narrow, mm, igubal®

For metal bearing housings, FDA-compliant, dimensional series E

Începând cu 28,92 EUR/Pc.
Spherical ball, WEI, inch, igubal®
Spherical ball, WEI, inch, igubal®

Standard material, dimensional series E - narrow version

Începând cu 2,53 EUR/Pc.
Angled ball and socket joint, WGLM, igubal®
Angled ball and socket joint, WGLM, igubal®

Left-hand thread, with spherical cap, with plastic ball stud

Începând cu 2,52 EUR/Pc.
Angled ball and socket joint, WGRM LC, low cost, igubal®
Angled ball and socket joint, WGRM LC, low cost, igubal®

Low-cost, right-hand thread, with plastic ball stud

Începând cu 1,85 EUR/Pc.
Angled ball and socket joint, WGLM LC, low cost, igubal®
Angled ball and socket joint, WGLM LC, low cost, igubal®

Low-cost, left-hand thread, with plastic ball stud

Începând cu 1,85 EUR/Pc.
Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®
Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®

Low-cost, right-hand thread, with metal ball stud

Începând cu 2,63 EUR/Pc.
Angled ball and socket joint, WGRM DE, removable, igubal®
Angled ball and socket joint, WGRM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of polymer

Începând cu 5,49 EUR/Pc.
In-line ball and socket joint, AGLM, igubal®
In-line ball and socket joint, AGLM, igubal®

Left-hand thread, with spherical cap, with plastic ball stud

Începând cu 2,93 EUR/Pc.
In-line ball and socket joint, AGLM LC, low-cost igubal®
In-line ball and socket joint, AGLM LC, low-cost igubal®

Low-cost, left-hand thread, with plastic ball stud

Începând cu 2,02 EUR/Pc.
In-line ball and socket joint, AGRM LC, with steel pin, igubal®
In-line ball and socket joint, AGRM LC, with steel pin, igubal®

Low-cost, right-hand thread, with metal ball stud

Începând cu 2,97 EUR/Pc.
Adapter screw, PKRM, igubal®
Adapter screw, PKRM, igubal®

Right-hand thread

Începând cu 7,33 EUR/Pc.
Clevis joint, detectable, GERM-DT, igubal®
Clevis joint, detectable, GERM-DT, igubal®

Detectable, right-hand thread

Începând cu 6,89 EUR/Pc.
Spring-loaded fixing clip, detectable, GEFM-DT, igubal®
Spring-loaded fixing clip, detectable, GEFM-DT, igubal®

Detectable

La cerere
Clevis joint with pin and circlip, GELMK, igubal®
Clevis joint with pin and circlip, GELMK, igubal®

Left-hand thread

Începând cu 3,11 EUR/Pc.
Clevis joint with spring-loaded fixing clip, GELMF, igubal®
Clevis joint with spring-loaded fixing clip, GELMF, igubal®

Left-hand thread

Începând cu 3,22 EUR/Pc.
Clevis joint with spring-loaded fixing clip, detectable, GERMF-DT, igubal®
Clevis joint with spring-loaded fixing clip, detectable, GERMF-DT, igubal®

Detectable, right-hand thread

Începând cu 7,96 EUR/Pc.
Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®
Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®

Left-hand thread

Începând cu 8,18 EUR/Pc.
igubal® pillow block bearing, KSTM
igubal® pillow block bearing, KSTM

Compensation of misalignments, two mounting holes, dimensional series K

Începând cu 5,03 EUR/Pc.
Pillow block bearing, ESTM, W300, igubal®
Pillow block bearing, ESTM, W300, igubal®

Simple assembly, two mounting holes, dimensional series E

Începând cu 4,17 EUR/Pc.
Pillow block bearing, ESTM-GT-GT, igubal®
Pillow block bearing, ESTM-GT-GT, igubal®

Quick assembly, split, two mounting holes, dimensional series E

Începând cu 7,89 EUR/Pc.
igubal® AD-01-ESTM adapter for pillow block bearings
igubal® AD-01-ESTM adapter for pillow block bearings

Accessory, for pillow block bearings of the dimensional series E

La cerere
Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J
Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J

High stiffness, split housing, four mounting holes, dimensional series E

Începând cu 30,71 EUR/Pc.
High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X
High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, easy assembly, two mounting holes, dimensional series E

Începând cu 11,16 EUR/Pc.
High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X
High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, for high radial loads, four mounting holes, dimensional series E

Începând cu 12,24 EUR/Pc.
Spherical bearing, EGLM, igubal®
Spherical bearing, EGLM, igubal®

Space saving, dimensional series E

Începând cu 5,17 EUR/Pc.
Clip bearing, heavy duty, ECLM-HD, igubal®
Clip bearing, heavy duty, ECLM-HD, igubal®

For high axial and radial loads, dimensional series E

Începând cu 6,48 EUR/Pc.
Spherical bearing, KGLI, inch, igubal®
Spherical bearing, KGLI, inch, igubal®

Classic design, easy assembly, dimensional series K

Începând cu 2,88 EUR/Pc.
Spherical thrust bearing, SAM, igubal®
Spherical thrust bearing, SAM, igubal®

Compensation of misalignment errors

Începând cu 3,55 EUR/Pc.
Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V
Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V

Simple assembly, two mounting holes, dimensional series E

Începând cu 6,65 EUR/Pc.
Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V
Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V

For higher radial loads, four mounting holes, dimensional series E

Începând cu 7,03 EUR/Pc.
Spherical bearing, low cost, KGLM LC, J4, igubal®
Spherical bearing, low cost, KGLM LC, J4, igubal®

Cost-effective, simple assembly, dimensional series K

Începând cu 3,52 EUR/Pc.
Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®
Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®

Tolerance compensation, dimensional series E

Începând cu 6,25 EUR/Pc.
Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®
Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®

Tolerance compensation, dimensional series E

Începând cu 12,04 EUR/Pc.
Double joint, EGZM, J4VEM, igubal®
Double joint, EGZM, J4VEM, igubal®

Robust plastic, dimensional series E

La cerere
Angled ball and socket joint, WGLM DE, removable, igubal®
Angled ball and socket joint, WGLM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of galvanised steel

Începând cu 5,49 EUR/Pc.
Variable coupling joint, WDGM, with ball studs, igubal®
Variable coupling joint, WDGM, with ball studs, igubal®

Individual alignment of the bearing position

Începând cu 8,57 EUR/m
Variable double joint, KDGM, R, igubal®
Variable double joint, KDGM, R, igubal®

Individual alignment of the bearing position

Începând cu 14,34 EUR/Pc.
Variable double joint, KDGM, EK, igubal®
Variable double joint, KDGM, EK, igubal®

Individual alignment of the bearing position

Începând cu 21,02 EUR/Pc.
Clevis joint, GERI, igubal®
Clevis joint, GERI, igubal®

Right-hand thread

Începând cu 2,75 EUR/Pc.
Spherical bearing, slim line, KGLI SL, igubal®
Spherical bearing, slim line, KGLI SL, igubal®

For extremely small installation space, dimensional series K

Începând cu 3,02 EUR/Pc.
Clevis joint with pin and circlip, GERIK, igubal®
Clevis joint with pin and circlip, GERIK, igubal®

Right-hand thread

Începând cu 3,11 EUR/Pc.
Split pillow block bearing for square profiles, ESQM, igubal®
Split pillow block bearing for square profiles, ESQM, igubal®

Easy assembly and disassembly

Începând cu 95,66 EUR/Pc.
Clip bearing with galvanised steel ball studs, igubal®
Clip bearing with galvanised steel ball studs, igubal®

Connection for rotating and pivoting movements

Începând cu 3,90 EUR/Pc.
Ball stud made of tribo-plastic with male thread, GZRM, igubal®
Ball stud made of tribo-plastic with male thread, GZRM, igubal®

Ball stud made of Tribo plastic

Începând cu 0,66 EUR/Pc.
Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®
Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®

Low moisture absorption, dimensional series E

Începând cu 2,54 EUR/Pc.
Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®
Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®

High holding forces when assembled

Începând cu 41,24 EUR/m

Consultanta

I would be happy to answer your questions personally

Nora Boeriu

+40 257 211119
Scrieti e-mail

Expediere ?i consultan?a

În persoana:

Luni - Vineri de la 7 am la 8 pm.
Sâmbata de la 8 am la 12 pm.

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.