igubal® rod end bearing, female thread
With female thread in metric and inch dimensions
igubal® rod end bearings can also be used without any problems in a tough environment. The bearings are corrosion-resistant in moist or wet areas and are resistant to weak acids and alkalis. The application temperatures range from
-30 to +80 °C. Noteworthy is the insensitivity to dirt and dust.
In case of misuse or crash of the system, igubal® products CL DT can be found quickly through their detectable materials. Even the smallest fractions are thus detected using commercially available metal detection systems.
When you want to save weight
When rotating, oscillating and linear movements should be implemented
When high-frequency oscillations/vibrations predominate
When a low-noise operation is desired
When an electrically insulating part is required
When freedom from corrosion is desired
For combinations with pneumatic cylinders and gas struts
When chemical resistance is required
When high stiffening is required
When you have temperatures above +80°C (then HT options)
When rotation speeds in excess of 0.5 m/s should be implemented
When very high tensile and lateral loads prevail
When applications should be implemented with hydraulic cylinder
When dimensions over 30 mm are needed
Maintenance-free, self lubricating
Very high fatigue strength in varying loads
Compensation for alignment errors
Compensation of edge loads
Insensitive to dirt, dust and lint balls
Resistant to corrosion and chemicals
High dampening qualities
Suitable for rotary, oscillating and linear movements
Very low weight
Dimensional series K and E, dimensions according to DIN ISO 12240
Version with metal sleeve in the spherical ball for enhanced torque
igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9.
Please contact us in case you require lower or more bearing tolerances.
igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing.
In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures.
Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained.
The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft.
igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the
Form A - with male thread and
Form B - with female thread
Dimensional series K in A+B variants for temperatures upt to
+200°C (HAT material).
Peste 100.000 de produse pe stoc! Livrare şi consultanţă zilnic între 08:00 şi 18:00!Newsletter Registration Condiţii generale de colaborare Impresii/Păreri Indicaţii generale Declaraţia cu privire la confidenţialitatea datelor