igusigus-icon-cart(0)

iglidur® G, flanged bearing, mm

The all-round classic with an excellent price-performance ratio

iglidur® G, flanged bearing, mm
igus-icon-lupe
iglidur® G, flanged bearing, mm drawing
igus-icon-lupe
1 from 2
iglidur® G, flanged bearing, mm
iglidur® G, flanged bearing, mm drawing
  • Part number: GFI-0203-02
  • Material: iglidur® G
  • Shape: Shop flanged bearings
  • Dimensions:
    • d1 0.125 inch
    • d2 0.1875 inch
    • d3 0.312 inch
    • b1 0.125 inch
    • b2 0.032 inch
  • Adjust dimension
  • Manufacturing method: Injection moulding
  • Service life:

    Not available

    igus-icon-info-circle-gray
Material properties:
  • Excellent coefficient of friction
  • Resistant to edge pressure
  • Resistant to shocks and impacts
  • Particularly resistant to dirt and dust
  • Resistant to high loads (>60N/mm²)
  • Mould resistant according to DIN EN ISO 846
  • Fogging behaviour according to DIN 75201-B
Total price:

plus VAT and shipping charges

loading...
igus-icon-lieferzeit
Gata de expediere în 10 zile lucrătoare din Germania

Over 250,000 manufacturers worldwide rely on 100% lubrication and maintenance-free iglidur® plastic bearings. 
[Link id="269"]

iglidur® G | The all-rounder
The widest range of different requirements is covered by iglidur® G plain bearings. This is why the material is rightly described as universal. Applications with medium to high loads, medium sliding speeds and medium temperatures are recommended. iglidur® G is the decathlete among the iglidur® materials. Extraordinarily good in all technical disciplines and, above all, the classic all-rounder in terms of its general, mechanical, thermal and tribological properties.

Typical application areas

[Link id="16"]
[Link id="20"]
[Link id="17"]
[Link id="18"]
[Link id="19"]

Here you will find further application possibilities:
[Link id="9"]

 

When to use it?
  • When an economical all-round performance bearing is required
  • For low to average surface speeds
  • When the bearing needs to run on different shaft materials
  • For pivoting and rotational movements
When not to use it?
  • When mechanical rework is required
    [Link id="112"]
  • When maximum wear resistance is required
    [Link id="114"]
  • When universal chemical resistance is required
    [Link id="116"]
  • If temperatures are permanently higher than +130°C
    [Link id="140"]
    [Link id="116"]
    [Link id="142"]
  • For use under water
    [Link id="142"]

[Link id="3"]

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® plain bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be installed with low bearing clearance. The following applies to the wall thickness: The thicker the bearings are, the greater the bearing clearance must be.
[Link id="2"]

Installation
iglidur® plain bearings are press-fit bearings. The inside diameter is only set with the corresponding tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures a secure press fit of the bearings. Axial or radial displacements in the housing are thus reliably avoided.
[Link id="6"]

Unsure if it fits?

Consulting

I would be happy to answer your questions personally

Nora Boeriu
Nora Boeriu

igus-icon-phone+40 257 211119

Shipping and consultation

In person:
Monday to Friday from 8am - 8pm.
Online:
Chat service
24h
Ce putem să îmbunătățim pentru dvs.? Spuneți-ne ce părere aveți.

Despre igus®

Servicii

Contact

Metodele noastre de plată

  • Cumpărați în cont

      Rămâneți la curent și înscrieți-vă la buletinul informativ igus® aici.

      igus-icon-globeLimba:Română|Țara:România

      Termenii "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "lanțuri pentru macarale", "ConProtect", "cradle-chain", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "easy chain", "e-chain", "e-chain systems", quot;e-ketten", "e-kettensysteme", "e-loop", "energy chain", "energy chain systems", "enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear", "iglidur", "igubal", "igumid", "igus", "igus îmbunătățește ceea ce mișcă", 73quot;igus:bike", "igusGO", "igutex", "iguverse", "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "plastics for longer life", "print2mold", "Rawbot", "RBTX", "readycable", "readychain", "ReBeL" , "ReCyycle", "reguse", "robolink", "Rohbot", "savfe", "speedigus", "superwise", "take the dryway", "tribofilament", "tribotape", "triflex", "twisterchain", "când se mișcă, igus îmbunătățește", "xirodur", "xiros" și "yes" sunt mărci comerciale protejate legal de igus® GmbH/ Cologne în Republica Federală Germania și, după caz, în unele țări străine. Aceasta este o listă neexhaustivă de mărci comerciale (de ex. cereri de mărci comerciale în curs de soluționare sau mărci comerciale înregistrate) ale igus GmbH sau ale companiilor afiliate igus în Germania, Uniunea Europeană, SUA și/sau alte țări sau jurisdicții.

      igus® GmbH subliniază faptul că nu vinde produse ale companiilor Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosch Rexroth, SEW, Siemens, Stöber și toți ceilalți producători de elemente de acționare menționați pe acest site web. Produsele oferite de igus® sunt cele ale igus® GmbH